Designed to provide your fish tank with water of highest quality. The filter kit comes complete with the following: - 5 Stage Reverse Osmosis water filtration system - 3x 2 meter lengths of tubing (white, red, blue) - Mains connector: 3/4" to 1/4" adapter - Waste water clamp - Water flow restrictor to the osmosis membrane - Housing spanner - to open the pods when pre filters need changing - Housing spanner - to open the Reverse Osmosis membrane filter housing Filters' Specifications: Filter 1: 10" polypropylene foam filter cartridge removes sand, rust, silt and other sediments up to 5 Micron Filter 2: 10" activated carbon block filter. The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances.
Filter 3: 10 activated carbon filter removes 98% to 99% of free chlorine, chlorinated solvents, aromatic hydrocarbons, as well as up to 85% of pesticides of chlorogenic origin, polyaromatic compounds, phenol, benzene and organic substances. Filter 4: Reverse Osmosis high quality membrane (100GPD). The membrane holds up to 99% of contamination from feed water. It successfully removes harmful organic and non-organic compounds, heavy metals and some bacteria and viruses. The efficiency of the membrane is shown in GPD units (gallons per day) Filter 5: In-line cartridge filled with high quality nitrate remover resin to removes nitrate from water.
The recommended replacement cartridges /depends on water usage and its condition/: -Pre filters: every 4-6 months -RO membrane: every 2-3 years System's Specifications: - Filtration stages: 5 - Pressure: 2.8- 6 bar - Water temperature 2-45°C - pH range: 4-10 - capacity (at optimal conditions) up to 100GPD - Filter size: height 44 cm, width 40 cm, depth 15 cm. Domestic use only - Safety standards compliant. Quick and easy to install.