S/Offer 5 Stage RO reverse osmosis water filter system 100GPD Nitrate removal

  
Aquati 5 Stage Reverse Osmosis Pure Water Filter for Tropical and Marine Aquariums /100 GPD/. Aquati 5 Stage RO filter is ideal for preparing water for saltwater and freshwater aquariums. The filtered water is clear, soft and free of contamination. Due to the fact that reverse osmosis is a 100% natural process, the filtration does not involve any chemicals. Designed to provide your fish tank with water of highest quality. The filter kit comes complete with the following: - 5 Stage Reverse Osmosis water filtration system - 3x 2 meter lengths of tubing (white, red, blue) - Mains connector: 3/4" to 1/4" adapter - Waste water clamp - Water flow restrictor to the osmosis membrane - Housing spanner - to open the pods when pre filters need changing - Housing spanner - to open the Reverse Osmosis membrane filter housing Filters' Specifications: Filter 1: 10" polypropylene foam filter cartridge removes sand, rust, silt and other sediments up to 5 Micron Filter 2: 10" activated carbon block filter.

The carbon is formed in specially pressured, high density blocks to gain high adsorption rate of chlorine, other chemicals and multiparticle organic substances. Filter 3: 10 activated carbon filter removes 98% to 99% of free chlorine, chlorinated solvents, aromatic hydrocarbons, as well as up to 85% of pesticides of chlorogenic origin, polyaromatic compounds, phenol, benzene and organic substances. Filter 4: Reverse Osmosis high quality membrane (100GPD). The membrane holds up to 99% of contamination from feed water.

It successfully removes harmful organic and non-organic compounds, heavy metals and some bacteria and viruses. The efficiency of the membrane is shown in GPD units (gallons per day) Filter 5: In-line cartridge filled with high quality nitrate remover resin to removes nitrate from water. The recommended replacement cartridges /depends on water usage and its condition/: -Pre filters: every 4-6 months -RO membrane: every 2-3 years System's Specifications: - Filtration stages: 5 - Pressure: 2.8- 6 bar - Water temperature 2-45°C - pH range: 4-10 - capacity (at optimal conditions) up to 100GPD - Filter size: height 44 cm, width 40 cm, depth 15 cm. Domestic use only - Safety standards compliant. Quick and easy to install.