Baileys Water Fed Pole Pump And Digital Controller

  
Pump and Controller kits mounted on a plate with pre drilled holes ready for you to easily install to your system at home. This is by far the best pump to use as a window cleaner if you intend to use with a flow controller. This product is even strong enough to power two poles via a splitter. This is the same pump/controller kit that comes fitted with our very popular commercial van mounted systems. Dimensions: 115 x 65 x 4 (mm).

Working Temperature 0 - 40 Deg C. Supply Voltage: 11- 14 VDC.

For absolute safety always wire through the pump pressure switch. This is a WATER PUMP controller: It will not work with air in the system.

ALWAYS prime your system before starting work. Do not set the Cal value too high. Setting it higher than necessary places extra strain on both the pump and the controller in a dead end situation.

This can result in damage to both the pumps and your controller. Please see or other items. We supply many window cleaning supplies including a full water fed pole set up, van's, water tanks and resin.