You can check the purity of the water with the TDS meter to make sure it's always 0 ppm. It's as simple as that! Recommended Features for a complete solar panel cleaning kit. 11L DI Vessel full of DI resin (these have a wider base which is more stable if you are intending to set up your system outside or if you want to move it around). 27ft SPOT-LITE Fibreglass water fed pole with an Unger solar brush.
30m reinforced PVC hose - this is to conenect your cannister to the tap and your pole. Tap adapter - this has a 1/2" and 3/4" female thread depending on the thread on your tap! Waterstop Connector to connect your tap. Pole control valve: this goes on the end of your 1/2 hose to connect to the pole tubing via the aluminum hoselock adaptor. Common Questions: How long will the resin last or how much pure water will I get from this?
This all depends on the quality of your water in your area. The TDS (sometimes referred to as PPM) reading needs to be zero in order for the water to do its job. Is there any waste water with this setup?
No there is no waste water. Do I need a pump?
With this setup that is just for your house, the pressure from your garden tap is usually sufficient to supply water to the ground and first floor levels of most standard sized properties. (Picture of items not to scale, colours can vary).
The item "Complete Solar Panels Kit with DI Resin and Water Fed Pole" is in sale since Wednesday, April 19, 2017. This item is in the category "Home, Furniture & DIY\Household & Laundry Supplies\Cleaning Tools\Squeegees & Window Cleaning".
The seller is "cleaningspotltd" and is located in London. This item can be shipped to United Kingdom.